visual visual
Integrated Construction Management
> > CAREERS > Apply online today!

Apply online today!

Careers

MaxCon is now providing a personnel service that delivers a project team to the customer. We educate and train our employees to become better team players with an uncompromising commitment to each customer and to the success of their mission.

We have earned our reputation by hiring career professionals who share our core values: Reliability and Uncompromising Commitment.


1. Project Manager


Essential Duties and Responsibilities


The job expertise may vary due to the development of the project-scope in order to achieve high quality standards. The main work consists of identifying improvements to the existing system independently and communicating them to the customer.


The Aim is to achieve International Code Compliance and International Standard Quality Assurance and Quality Control Management Objective of Construction Project Implementation.


- Reporting to Project Director.

- Provide expert opinion (inspection / assessment / auditing) on this task together with involved specialists

- Review Project Master schedule and provide advice to CLIENT

- Recommend the state-of-the-art technology or solution on the specific issues

- Submit the necessary reports & provide the explanation of performed activities, if necessary

- Co-ordination of major schedule between CLIENT, Designers and General contractor

- Providing the review opinion for Samsung documentations & Risk assessment

- Lead the project team and demonstrate leadership clarifying & guiding the team to achieve objectives and goal

- Participation in meeting with Designers and General contractor (subcontractors, if necessary) for the project progression

- Participation in meeting with the plant owner (CLIENT) for project discussion

- Perform other duties as necessary


Requirements:

- Several years of experience in the semiconductor industry working

- Good General knowledge of SEMI code (plus other relevant standards e.g. FM, NFPA, ... )

- EPC Turnkey Project Experience

- Experience in Fast Track Projects

- Experience in Construction Management/Planning and Implementation

- Experience with Safety and Regulation Compliance

- Experience with Environmental Health and Safety

- Experience in leading a team of Multi National Multi Disciplined Engineers

- Experience of Working In Asia

- Degree (or equivalent)

- Report and communicate in English

- Skilled in MS Office (PowerPoint)



2. Chemical Systems Specialist


Requirements

Several years of experience in the semiconductor industry working with chemical supply system

- Good knowledge of SEMI code (and other standards e.g. FM, NFPA)

- Work experience in the design of chemical supply systems

- Work experience in either semiconductor plant construction, chemical supplier or equipment manufacturer

- Degree in engineering or chemistry (or equivalent)

- Report and communicate in English

- Skilled in MS Office (PowerPoint)


Report to project manager

Assessment of Chemical supply systems (delivery/distribution to point of use).

- Review of the design, calculations, drawings, specifications and testing/commissioning procedures to suggest improvement in accordance to client’s specifications, 

  international standards and codes in addition industry relevant best practices

- Review of the design and installation of Cabinets, VMBs, VDSs, Sensors, Pumps and Tank

- Review of relevant documentation (e.g. P&IDs, PFDs, Shop drawings, Standard Operation Procedures, Bid packages / order specifications)

- Equipment and Piping Layout Optimization

- Double Containment Piping specification review

- Calculation of optimal dimension and pressure drop in Piping Systems

- Ensure all safety precautions have been taken by reviewing MSDS and proposed Safety equipment

- Review Leak prevention, detection and containment methods

- Review piping materials, sizes types of fittings, types of control valves and other control equipment

- Verification of the compatibility of material used and equipment (chemical storage and supply system, VMB, double containment pipe, leak detection, auto shut-off 

  valve) in design specification and drawing

- Make suggestions to improve quality and production as well as yield safety benefits to the Operation

- Summarize findings and provide Non-Conformance Report and Recommendation

- Discuss NCR and REC for corrective action with Designers and/or General Contractors

- Participation in meeting with Designers and General contractor (subcontractors, if necessary) for the project progression, if necessary

- Participation in meeting with the plant owner for project discussion, if necessary

- Perform other duties as necessary



3. Gas Supply Systems Specialist


Requirements

Several years of experience in the semiconductor industry working with Bulk Gas and Specialty Gas system

- Knowledge of semiconductor facilities installation process

- Good knowledge of SEMI code (and other standards e.g. FM, NFPA, EIGA/BCGA)

- Work experience in the design of gas supply systems

- Work experience in either semiconductor plant construction, gas supplier or equipment manufacturer

- Degree in Engineering, (or equivalent)

- Report and communicate in English

- Skilled in MS Office (PowerPoint)


Report to project manager

- Assessment of Gas supply systems (delivery/distribution to point of use)

- Review of the design, calculations, drawings, specifications and testing/commissioning procedures to suggest improvement in accordance to Client’s specifications, 

  international standards and codes in addition industry relevant best practices

- Review segregation and separation distances ensuring the necessary distances between Gas Types and other physical structures are observed

- Equipment and Piping Layout Optimization

- Double Containment Piping specification review

- Calculation of optimal dimension and pressure drop in Piping Systems

- Ensure all safety precautions have been taken by reviewing MSDS and proposed Safety equipment

- Review of Gas Panel, Gas Cabinet, VDS and VMB Design

- Review Leak prevention, detection and containment methods

- Review piping materials, sizes types of fittings, types of control valves and other gas control equipment

- Review of Gas Venting, Purging and scrubbing design

- Make suggestions to improve quality and production as well as yield safety benefits to the Operation

- Summarize findings and provide Non-Conformance Report and Recommendation

- Discuss NCR and REC for corrective action with Designers and/or General Contractors

- Participation in meeting with Designers and General contractor (subcontractors, if necessary) for the project progression, if necessary

- Participation in meeting with the plant owner for project discussion, if necessary

- Perform other duties as necessary



4. Life Safety Specialist


The job expertise may vary due to the development of the project-scope in order to achieve high quality standards. The main work consists of identifying improvements to the existing system independently and communicating them to the customer


The Aim is to achieve International Code Compliance and International Standard Quality Assurance and Quality Control Management Objective of Construction Project Implementation.


Assessment of Safety Systems and Protocols. Work Scope is included but not limited to


Review of: 

- Life Safety System

- Gas detection

- Evacuation plans/alarms/exits, routes

- Emergency chemical shut down system

- Spill detection

- Spill containment

- Labelling of production areas

- Drawings

- Job Site Safety

- Risky & Hazard Area Safety

- Heavy Equipment Safety

- OSHA or any other European standard Application


Witness of:

- Life Safety System related tests

- Necessary Test


Provide:

- Review result of current applying safety codes & regulations

- Life Safety System (LSS) Audit and technical guidance to sustaining facility teams to maintain and in order to improve the construction quality.


Requirements:

- Several years of experience in the semiconductor industry working with safety matters

- Skilled in MS Office (PowerPoint)

- Report and communicate in English

- Degree in Engineering (or equivalent)

- Good knowledge of SEMI code, International Safety Codes



5. Fire Protection Specialist 


Essential Duties and Responsibilities

The job expertise may vary due to the development of the project-scope in order to achieve high quality standards. The main work consists of identifying improvements to the existing system independently and communicating them to the customer.


The Aim is to achieve International Code Compliance and International Standard Quality Assurance and Quality Control Management Objective of Construction Project Implementation.


Assessment of Safety Systems and Protocols. Work Scope is included but not limited to

- Report to project manager

- Review of the design calculation, drawing, specification, sequence of Operations and testing/commissioning procedure to suggest improvement in accordance to 

  client's specification, international standards and codes in addition industry relevant best practices

- Ensure correct classification of explosion proof and chemical area and proper design are being considered

- Ensure fire escape routing, door lock de-activation during alarm, access to emergency eye wash and shower in accordance to international standard

- Summarize findings and provide as well as Discuss NCR and REC for corrective action with Designers and/or General Contractors

- Verification of the adequacy of equipment used (fire alarm sensor, fire sprinklers, gas suppression) in design specification and drawing

- Provide review opinion for Samsung documentation & Risk assessment for life safety and fire protection system

- Fire Separation Construction in buildings

- Building alarm systems (e.g. heat & smoke)

- Building fire protection systems (e.g. automatic sprinkler systems)

- Fire protection water supplies (fire pump, water storage tanks, undergrounds, hydrants)

- Clean Agent Gas Suppression systems (calculations/isometrics, alarms)

- Submit the necessary reports & provide the explanation of performed activities, if necessary

- Participation in meeting with Designers and General contractor (subcontractors, if necessary) as necessary

- Participation in meeting with the plant owner for project discussion, if necessary

- Perform other duties as necessary


Expected Outcomes for this Project


- Sprinkler System (Water) - System Calculation (Pump Capacity, Water Capacity, Water Pressure and etc.) - Appropriateness of sprinkler head and pipe location

- Detectors and Sensors (Smoke, Heat, VESDA, Flame) - Appropriateness of detection range - Installation location

- Clean Fire Extinguishing Agent (FM200, FE-13, Nitrogen, Inergen) - Extinguishing Range - Appropriateness of Agent - Activation Procedure (Detection, Alarm, 

  Spraying)

- Smoke Control System - Smoke Control Range - System Calculation (Fan, Duct, Flow)

- Fire Extinguisher - Appropriateness - Installation Location

- Emergency Exit Route - Egress Route - Egress Leading Light, Exit Sign - Door Open & Close Direction

- Broadcasting system - Broadcasting Range - Auxiliary Power

- Furthermore, monitoring of installation work on site and reporting of all substandard installations and installation procedures.


Requirements:

- Several years of experience in the semiconductor industry working with Electrical Systems

- Good knowledge of SEMI code (plus other relevant standards e.g. FM, NFPA, ... )

- Degree in Electrical Engineering (or equivalent)

- Report and communicate in English

- Skilled in MS Office (PowerPoint)



6. HVAC Exhaust Specialist


Essential Duties and Responsibilities

The job expertise may vary due to the development of the project-scope in order to achieve high quality standards. The main work consists of identifying improvements to the existing system independently and communicating them to the customer.


The Aim is to achieve International Code Compliance and International Standard Quality Assurance and Quality Control Management Objective of Construction Project Implementation.


Qualification:

Several years of experience in the semiconductor industry working with HVAC Systems

- Good knowledge of SEMI code (plus other relevant standards e.g. FM, NFPA, etc.)

- Degree in Engineering “PLUS” more than 10 years of experience in the field

- Report and communicate in English

- Skilled in MS Office


Detailed Job Description:

- Report to Project Manage

- Review of the design calculation, drawing, specification and testing/commissioning procedure to suggest improvement in accordance to client’s specification, 

  international standards and codes in addition industry relevant best practice

- Review QA/QC Plan for Exhaust system

- Review Shop drawings

- Review SOPs (Standard Operation Procedures)

- Review Material Specifications

- Review Equipment specifications

- Review Bid packages / order specifications

- Provide review opinion for Samsung documentation & Risk assessment for Exhaust System

- Summarize findings and provide Non Conformance Report and Recommendation

- Review construction Installation process and verify work procedures

- Discuss NCR and REC for corrective action with Designers and/or General Contractors

- Verification of the compatibility of material used and equipment in design specification and drawing

- Submit the necessary reports & provide the explanation of performed activities, if necessary

- Participation in meeting with Designers and General contractor (subcontractors, if necessary) for the project progression, if necessary

- Participation in meeting with the plant owner for project discussion, if necessary

- Perform other duties as necessary

- Furthermore, monitoring of installation work on site and reporting of all substandard installations and installation procedures.



7. Process Piping Systems/Welding Metallic Specialist 


Essential Duties and Responsibilities

The job expertise may vary due to the development of the project-scope in order to achieve high quality standards. The main work consists of identifying improvements to the existing system independently and communicating them to the customer.


The Aim is to achieve International Code Compliance and International Standard Quality Assurance and Quality Control Management Objective of Construction Project Implementation.


Assessment of Process Piping Systems and Associated Welding for Metallic Pipe (delivery/distribution to point of use)


Work Scope is included but not limited to:

Report to the PM

- Review and validate metallic pipe compatibility, supports and routing calculations, specifications and design

- Review of project specific WPSs & PQRs and provide improvement suggestions

- Review welder’s selection test and selection procedure especially on sensitive and critical pipe system for example Silane pipe

- Review and validate NDE procedural instructions, procedures & techniques, personnel & equipment used for testing/inspection. This includes leak check, air and 

  water pressure test

- Review QC plan for welding parts and provide advice

- Summarize findings and provide Non Conformance Report and Recommendation

- Discuss NCR and REC for corrective action with Designers and/or General Contractors

- Providing the review opinion for Samsung documentations & Risk assessment

- Submit the necessary reports & provide the explanation of performed activities, if necessary

- Participating meeting with Designers and General contractor (subcontractors, if necessary) for the project progression, if necessary

- Participating meeting with the plant owner (CLIENT) for project discussion, if necessary

- Advice CLIENT under agreed international standard to ensure the designers fulfill all necessary requirements

- Checking the quality of the prepared protocol/checklist

- Perform other duties as necessary


Witness of:

- Necessary tests

- Furthermore, monitoring of installation work on site and reporting of all substandard installations and installation procedures.


Requirements:

- Several years of experience in the semiconductor industry working with Piping systems

- Good knowledge of SEMI code (plus other relevant standards i.e. FM, NFPA, etc.)

- Degree in Engineering

- Report and communicate in English

- Skilled in MS Office (PowerPoint)



8. Process Piping & Welding Specialist Non Metallic


Essential Duties and Responsibilities


The job expertise may vary due to the development of the project-scope in order to achieve high quality standards. The main work consists of identifying improvements to the existing system independently and communicating them to the customer.


The Aim is to achieve International Code Compliance and International Standard Quality Assurance and Quality Control Management Objective of Construction Project Implementation.


Assessment of Process Piping supply systems Non Metallic and Welding (delivery, distribution to point of use)


Work Scope is included but not limited to:

- Report to the PM

- Review and validate metallic pipe compatibility, supports and routing calculations, specifications and design

- Review of different nonmetallic pipe materials preparation, bonding and installation procedures and provide improvement suggestions.

- Identify suitable pipe fittings to use to prevent unnecessary head loss and damage to the system.

- Review and validate NDE procedural instructions, procedures & techniques, personnel & equipment used for testing/inspection. This includes leak check, air and 

  water pressure test.

- Review QC plan for welding parts and provide advices

- Summarize findings and provide Non Conformance Report and Recommendation

- Discuss NCR and REC for corrective action with Designers and/or General Contractors

- Providing the review opinion for Samsung documentations & Risk assessment

- Submit the necessary reports & provide the explanation of performed activities, if necessary.

- Participating meeting with Designers and General contractor (subcontractors, if necessary) for the project progression, if necessary

- Participating meeting with the plant owner (CLIENT) for project discussion, if necessary

- Advice CLIENT under agreed international standard to ensure the designers fulfill all necessary requirements

- Checking the quality of the prepared protocol/checklist

- Perform other duties as necessary


Witness of:

- Necessary tests

- Furthermore, monitoring of installation work on site and reporting of all substandard installations and installation procedures.


Requirements:

- Several years of experience in the semiconductor industry working with Plastic Piping Systems systems

- Good knowledge of SEMI code (plus other relevant standards e.g. FM, NFPA, ... )

- Degree in Engineering

- Report and communicate in English

- Skilled in MS Office (PowerPoint)



9. WWT Specialist 


Essential Duties and Responsibilities

The job expertise may vary due to the development of the project-scope in order to achieve high quality standards. The main work consists of identifying improvements to the existing system independently and communicating them to the customer.


The Aim is to achieve International Code Compliance and International Standard Quality Assurance and Quality Control Management Objective of Construction Project Implementation.


Assessment of WWT systems


Work Scope is included but not limited to:


Report to project manager

- Review of the design calculation, drawing, specification and testing/commissioning procedure to suggest improvement in accordance to CLIENT specification, 

  international standards and codes in addition industry relevant best practices.

- Look into chemical dosing and mixing efficiency of WWT system for coagulation, flocculation and sedimentation. Suggest best available technologies, if applicable.

- Look into best available aeration technologies and blower to achieve maximum cost saving. In general aeration consume about 60-70% of the overall energy used in 

  WWT plant

- Summarize findings and provide Non Conformance Report and Recommendation

- Discuss NCR and REC for corrective action with Designers and/or General Contractors

- Verification of the adequacy of material used and capacity of equipment's in design specification and drawing

- Provide review opinion for Samsung documentation & Risk assessment for WWT system

- Submit the necessary reports & provide the explanation of performed activities, if necessary

- Participating meeting with Designers and General contractor (subcontractors, if necessary) for the project progression, if necessary

- Participating meeting with the plant owner for project discussion, if necessary

- Perform other duties as necessary


Witness of:

Necessary tests

- Furthermore, monitoring of installation work on site and reporting of all substandard installations and installation procedures.


Requirements:

Several years of experience in the semiconductor industry working with IWT/WWT systems

- Good knowledge of SEMI code (plus other relevant standards e.g. FM, NFPA, etc.)

- Degree in Engineering

- Report and communicate in English

- Skilled in MS Office (PowerPoint)